Waldorf Q+ Manuel d'utilisateur télécharger pdf (Page 53)

Step Sequencer – Sequencer Edit Menu

Waldorf Q User’s Manual 54

Transpose Quantize

Next Cycle

Transpose Quantize Next Step / Next Bank / Next Cycle

Determines when the transpose is actually performed after a note was hit.

• Next Step means that the transpose is performed immediately after the note was hit.

• Next Bank means that the transpose takes place when the next bank is played.

• Next Cycle means that the transpose is performed when a new cycle starts.

Rotate Steps

Banks | Cycle

Rotate Steps

These are temporary controls that actually change the sequence. So, use them with care (and after

you've read this description):

As long as you turn one of these controls, the banks or cycles are moved back or forth in the

sequence. When you i.e. turn Rotate Steps Banks to +01, the first bank is moved to the second, the

second to the third and so on. The same behaviour is available for cycle. After you've released the

control, it is reset to 0 but the change is performed in the sequence, so don't be confused.

Init All Lengths

Steplen |Notelen

Init All Lengths (Step and Note Length) 1/64...4 Bars

As soon as you turn one of these controls, the Step Lengths or Note Lengths of all steps are set to this

value. This is a handy feature when you e.g. want to set all steps to 16th notes.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 170 171

Pas de commentaire

Waldorf Q+ Manuel d'utilisateur Page 53