Waldorf Pulse Manuel d'utilisateur télécharger pdf (Page 49)

User’s Manual Pulse • PulsePlus

MIDI Device ID

CV/Gate Parameters

CV/Gate Channel

When this parameter is set to Off, the Pulse sends out the played notes via CV

1 Out 쐋 and Gate Out 쐄. An incoming control voltage at CV In 쐃 and Gate

In 쐇 triggers the sound generation of the Pulse.

When the parameter is set to 1...16, the CV/Gate interface is operating

independently. Received notes on the selected Channel are sent out as control

voltages via CV 1 Out 쐋 and Gate Out 쐄. Incoming control voltages at CV In

쐃 and Gate In 쐇 are transformed into notes and sent on the selected channel.

The internal sound generation will not be affected.

CV In Adjust

To proceed the adjustment, connect the CV output of the keyboard to the CV In

input 쐃 of the Pulse. Connect the Gate jacks in the same way. Now adjust the

parameter to a value, that causes the Pulse to generate a proper tune on the

played notes.

Please note that the CV In input can operate with linear scaled control voltages

of 1V/Octave only.

Adjust parameter for the CV In input.

-64...+63

Example: Channel 3

Off

MIDI send and receive channel for the CV/Gate

interface

Off, 1...16

Device-ID for system exclusive data transmission.

0...126 Preset value is 0

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 77 78

Pas de commentaire

Waldorf Pulse Manuel d'utilisateur Page 49