Waldorf Blofeld Manuel d'utilisateur télécharger pdf (Page 60)

Sound Parameter

Blofeld User´s Manual 60

Fade -64…+63

Controls the speed with which the LFO is faded in or out.

With this parameter you can create slowly rising or falling

modulations that might create interest when routed to

pitch or volume.

Parameter Controls of the Modulation Matrix

A modulation can be described as a signal-generating

unit’s influence upon a sound parameter. The terms used

in this context are "Source" and "Destination". The Blofeld

offers 16 independent modulation assignments (slots) each

with individual settings of source, destination and

amount. The Modulation Matrix (Mod Matrix) is the key of

the power of each Waldorf synthesizer, so start

experimenting with it right now.

w A complete table of all available sources and

destinations can be found in the Appendix.

Select 1...16

Selects the respective Modulations slots 1 to 16.

Source see table Modulation Sources

Defines the modulation source.

Amount -64…+63

Determines the amount of modulation applied to the

destination. Since the modulation is in fact a

multiplication of the source signal and this parameter, the

resulting amplitude depends on the type of modulation

source you select:

• B For the so-called unipolar modulation sources,

the resulting amplitude lies within the range of

0…+1, if Amount is positive or 0…-1, if Amount is

negative. These sources are: all envelopes, all

MIDI controllers including Modwheel, Foot

control etc., Velocity, Release Velocity, Aftertouch

(Pressure) and Polyphonic Pressure.

• For the so-called bipolar modulation sources, the

resulting amplitude lies within the range of -

1…0…+1. These sources are: all LFOs, Keytrack,

Pitchbend and the Modifiers.

Destination see table Modulation Destinations

Defines the modulation destination.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 127 128

Pas de commentaire

Waldorf Blofeld Manuel d'utilisateur Page 60