Host MIDI Setup
The top portion of the screen is for the 'Host' MIDI IN and Out data path. This is data that comes from and goes to
the DAW Host. MIDI port selection is achieved in the Host's MIDI setup.
Host MIDI In (data from Host):
The left portion is the Host MIDI In'. This is data that comes from the Host into the Editor. You may want to activate
these if you are using a MIDI keyboard controller for sending Note, Pitch, Modwheel data to/from the Synth or if
you are sending Host sequencer Note, Pitch, Modwheel data to the Synth through the Editor. You can activate
these with the button on the top right of the module. Set the filtering options. Only activate the data paths and
messages that you need. It is recommended to turn off the 'Program Change' functionality for all modules to avoid
conflicts with the Editor.
Host MIDI Out (data to Host):
The right portion is the 'Host MIDI Out'. This is data that comes from the Editor to the Host. You may want to
activate these if you are sending data from the Synth or Editor for track recording in the Host. Set the filtering
options. Only activate the data paths and messages that you need. It is recommended to turn off the 'Program
Change' functionality for all modules to avoid conflicts with the Editor. Be sure to read the section on 'A note on
Sysex MIDI and Host Plug-in Capabilities' as you normally cannot send Sysex MIDI data to a Host. Also, Hosts will
differ on how and what MIDI data they can interpret. Please refer to your Host User Manual for this information.
Editor MIDI Setup
The bottom portion of the screen is for the 'Editor' MIDI IN and Out data path. These should be activated to allow
communication between the Editor and the Synth. You can activate these with the button on the top right of the
module.
Editor MIDI In (data from Synth):
The left portion is the 'Editor MIDI In'. This is data that comes from the Synth into the Editor. All Editor controls will
respond to their correlated MIDI messages from the hardware itself. All controls respond to their correlated MIDI
CC numbers as listed in the Pulse Users Manual. Set the MIDI port and channel that the Synth is connected to. Set
the filtering options. Only activate the data paths and messages that you need. It is recommended to turn off the
'Program Change' functionality for all modules to avoid conflicts with the Editor.
Editor MIDI Out (data to Synth):
The right portion is the 'Editor MIDI Out. This is data that comes from the Editor to the Synth. Set the MIDI port and
channel that the Synth is connected to. Set the filtering options. Only activate the data paths and messages that
you need. It is recommended to turn off the 'Program Change' functionality for all modules to avoid conflicts with
the Editor. You will need all the other options turned on except the 'MIDI Clock' data for proper communication
between Synth and Editor.
(9 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels